Scuba Testing Equipment
Scuba Testing Equipment
Pricing is ONLY available to GMC authorized dealers.
Please login if you are a GMC dealer.
Flowbenches, workstations, and other modular instruments for testing regulators and valves. Pressure test chambers for checking dive instruments and validating watertight integrity.
|
Workstations and Flowbenches are special machines for testing all the important functions of scuba regulators and tank valves. They essentially embody the necessary compressed air source, hand tools, and instrumentation into a single apparatus designed specifically to repair / evaluate dive equipment. Testing done on a Workstation yields results at sea level equivalent, whereas a Flowbench can simulate actual dives, providing information on regulator performance at depth! Besides elevating the efficiency and professionalism of any dive shop department, these devices are very practical for both classroom and sales demonstrations.
|
|
|
|
|
Workstations and Flowbenches are special machines for testing all the important functions of scuba regulators and tank valves. They essentially embody the necessary compressed air source, hand tools, and instrumentation into a single apparatus designed specifically to repair / evaluate dive equipment. Testing done on a Workstation yields results at sea level equivalent, whereas a Flowbench can simulate actual dives, providing information on regulator performance at depth! Besides elevating the efficiency and professionalism of any dive shop department, these devices are very practical for both classroom and sales demonstrations.
|
|
|
|
|
For those dive shops who are not yet ready for a Flowbench or Workstation, GMC has a number of portable and desktop test instruments for scuba regulator and valve service. Certain apparatus such as #48105 and #48110 were designed as modules to work alone or in tandem. When used in unison, the modules create a mini-Workstation which was purchased one piece at a time.
|
|
|
|
|
For those dive shops who are not yet ready for a Flowbench or Workstation, GMC has a number of portable and desktop test instruments for scuba regulator and valve service. Certain apparatus such as #48105 and #48110 were designed as modules to work alone or in tandem. When used in unison, the modules create a mini-Workstation which was purchased one piece at a time.
|
|
|
|
|
This apparatus, offered in four distinct versions, is the current industry standard for testing the water-tight integrity, accuracy, and overall function of depth gauges, watches, dive computers, and certain underwater photographic gear. It's also useful for classroom demonstrations related to diving physics and physiology. Each unit is fitted with an internal plastic bucket so that equipment is actually tested underwater. In fact, many modern instruments may be harmed if tested dry because pressurized air can be forced behind seals and diaphragms! As modern TEK diving becomes widespread, it's essential that related life-support instrumentation be tested on a regular basis.
|
|
|
|
|
The products shown below are used to check the pressure within scuba tanks. Models for both DIN and yoke tanks valves are offered. Most utilize a sealed, oil-filled, stainless-cased, 5000 psi pressure gauge for a maximum environmental and shock resistance. All models have a standard screw-type bleeder. NOTE: THESE PRODUCTS ARE NOT INTENDED FOR PURE OXYGEN / NITROX SERVICE: SPECIAL MODELS ARE AVAILABLE
|
|
|
|
|
These air transfer devices, also called cross-overs, are used to equalize pressure between two dive cylinders. Each unit has a 2-foot, 5,000 psi service hose and a bleeder vent on one end. Both DIN and standard / yoke-mode types are offered. CAUTION: THESE PRODUCTS ARE NOT INTENDED FOR PURE OXYGEN / NITROX SERVICE! SPECIAL MODELS ARE OFFERED FOR THAT PURPOSE.
|
|
|
|
|